Ez Mud DP 15kg Pail

EZ-MUD® liquid polymer emulsion contains partially hydrolyzed polyacrylamide/polyacrylate (PHPA) copolymer and is used primarily as a borehole stabilizer to prevent reactive shale and clay from swelling and sloughing. EZ-MUD polymer emulsion is also added to low-solids drilling fluids to increase lubricity, fluid viscosity, and to improve carrying capacity of air/foam injection fluids.

• Appearance: Thick, opaque white liquid
• Density : 8.5 lb/gal (1.02 g/cm3)
• pH (1 quart per 100 gallons water) : 8.5
• Flash point, PMCC °F, C : >200 (>93.3)
• Thermal stability, °F, C : 250 (121)
• Stabilize reactive shale and clay formations
• Enhance slurry rheological properties
• Improve borehole stability
• Alleviate mud rings, bit balling and booting-off in clay formations
• Reduce drill pipe torque and pumping pressure
• Minimize rod chatter in diamond core drilling
• Create
• Flocculate non-reactive solids in reserve pit at low concentrations
• Mixes easily with minimum shear in fresh water
• Helps provide effective clay and shale stabilization with lower viscosity
• Helps impart high degree of lubricity
• Non-fermenting
• Breaks down chemically with household bleach (sodium hypochlorite)
• NSF/ANSI Standard 60 Certified